A fishing reel is a tubular mechanical device that is attached to a fishing rod. It is used in revolving and stowing lines. People use it for catching big fishes from the sea or river.
So, today we will discuss how to oil a fishing reel. Let’s get started, shall we?
Modern fishing reel usually has the help of fittings for distance, accuracy as well as line recovery. It is traditionally used in the recreational sport of angling and competitive casting. However, some special reels are used in mounting directly on the boat guns or transoms.
There are four types of fishing reels. These are- Spincast, Spinning, Fly and Baitcasting reel. Each of these has a different function and it requires different skills to control them. It is very easy to operate Spincast but the Spinning cast is the most popular reel because of its attractive feature. Baitcast is the most difficult one to operate.
It does not matter what fishing reel we use. However, it is important to maintain the fishing reel. So, to maintain the device, we should oil and clean the reel properly.
How t oil a fishing reel?
There are two types of oil given to the reel. One is regular oil and the other one is periodic. Follow these steps to oil a fishing reel:
1. Oil the bail
First, apply the oil on the bail. After pouring the oil, remove it three to four times. This action will spread over the joint.
2. Oil the screw
After that, put a few drops of oil on the screw. After placing the oil, get the bail joints three to four times.
3. Put some extra oil
Carrying loads are a very important part of the Spinning reel. To do this, this device is put a lot of saltwater as a result it causes erosion. Thus, put some extra oil into this part.
4. Move it for a while
After adding some oil, it has to move for a while. This will ensure the distribution of the oil in every case of the Spinning reel.
5. Oil the handle knob
Then, oil the handle knob. If the handle is of the open type, oil it on both sides.
Lightly oil them from time to time. You should use oil to the reel every two to three weeks according to the intensity of the use. As a result, it will run smoothly and enhance the lifetime.
Use Grease in some parts
Moreover, some parts of the spinning reel do not require oil. Instead of oiling these parts, grease them. Greasing is required in the parts like the main shaft of the tool, the dragon knob, and the knob seal.
Finding the right lubricant
For oiling the spinning reel, it is important to find the right lubricant. Lubricants are available in any local store. But if you want our recommendation, we will recommend Lucas Oil Product 10690 Fishing Reel Oil.
Sometimes the spinning reel manufacturers produce lubricants alongside the reels. If the spinning reel you are using, does produce fishing oil like that, you should use that fishing reel instead of anything else. Even if using the right lubricant or oil your reel is not functioning properly, you should contact the authorized customer center.
However, in the case of seasonal oiling of the reel, the part of this device is separated and oiling is done on each part. So, it is recommended to the users not to try it if they are not expert in the process of the separation and reassemble them. Rather than doing this task yourself, the authorized centre should be contacted to get the job done it.
Using Gun Oil
Gun oil is also used for fishing reels. However, it is a bit thicker for spool bearings. You can use gun oil for the gears of the fishing line. And there will probably be no noise as it will wash away in the water and leave the real unprotected.
We should not apply vaseline to the gears of the fishing line. But in an urgent situation, if you cannot oil in the reel, you can use vaseline as a bearing grease.
White Lithium for spinning reel
White lithium is good for fishing reels. It is used for metals to metals and metals to plastics applications. These lubricants help to protect against rust, frees surfaces and high heads.
Using WD-40 in spinning reel
Although WD-40 has made of chemical composition, it does not affect human or fish health. However, there is argumentation on whether WD-40 is harmful or not to the environment. Spraying WD-40 on the fishing line make water polluted which is less safe and enjoyable for the people.
It is very important to wash the reel after use. This will remove all debris and salt stuck to the reel after fishing.
How to clean a spinning reel?
So, to clean the Spinning reel in the best way, we can use the following steps-
- First, Tighten the drag knob.
- Then, rinse our real under low-pressure tap water.
- Then, rotate and rinse for 15-20 seconds.
- Gently clean the line roller with a brush.
- Brush the handle clean and clean the drag knob too.
- Spin the reel in the first rotation to get the excess water out.
- Hold on firmly to our reel and shake dry. Otherwise, the reel can be damaged if the water accumulates inside the parts of the reel.
- Wipe down our reel with a dry cloth.
- Next, remove the drag knob.
- Wipe off excess water on the top of the spool.
- Loosen our drag knob and leave your reel in a cool dry place.
Be careful when you are cleaning the reel
Some important things we need to be careful about cleaning the reels. Such as, avoid placing our reel under direct sunlight to dry, do not wash the reel in an upside-down position, and wash it in the upright position.
Being careful about those things, you can minimize the damage to your reel. If you get saltwater and sand, into your gear then avoid exposure to salt spray. You can drop gear while traveling on the boat. Be careful about it also.
Conclusion
Fishing reels are very popular among anglers. Although it is slightly complicated but more efficient and durable for catching fish. Thus, we should maintain the reel after using it through washing as well as oiling properly.
As we showed how to oil a fishing reel, I hope you will find it helpful.
